Features

• The pump features a unique 3-chamber design that significantly reduces pulsations without the need for additional dampener accessories. The compact footprint fits into small operational spaces, and installation is easy, with no need for a base plate or shaft alignment.
• The EVO Series pump also features a number of safety features, including real deadhead protection and built-in leak detection. Real deadhead protection ensures that the pump will not overheat or be damaged if the flow is stopped. Built-in leak detection sensors can detect diaphragm failure and shut down the pump to avoid leaks.
• Real Deadhead Protection: An encoder senses the speed and will slow the motor down and hold the programmed system pressure for long periods of time. The automated system enables the pump to restart the process without priming or can be programmed for automatic shutdown.
• You can monitor and control the pump flow according to changing process parameters like flow, head, torque and others.
• The EVO Series™ innovative design can save more than 20% on energy costs compared with competitive models and technologies

 

Specifications

Models	Aluminum Cast Iron Stainless Steel
Maximum Flow Rate (flood inlet)	140 GPM (530 l/min)
Displacement Per Cycle	0.67 gallons (2.6 liters)
Fluid Inlet / Outlet Hybrid – internal thread	ANSI / DIN Hybrid flange
Stroke	1.75″ (44.45 mm)
Inlet Pressure	10 PSIG (0.69 bar)
Maximum Average Working Pressure	120 PSIG (8.3 bar)
Maximum Deadhead Pressure	180 PSIG (12.4 bar)
Suspended Solids Maximum Diameter	1/4” diameter (6.4 mm)
Wet Suction Lift	30 ft (9.1 m)
Dry Suction Lift	18 ft (5.5 m)
Diaphragm / Ball Check Size	1.5″ (38 mm) equivalent
Peak Efficiency	70%
Maximum Pump Speed	198 rpm
Weight	VFD: 36 lbs (16 kg) Motor: 236 lbs (107 kg) Aluminum Pump Head: 376 lbs (171 kg) Stainless Steel or Cast Iron Pump Head: 517 lbs (235 kg) Pallet: 52 lbs (24 kg)
Mounting Dimension / Circumference Radius	3 equally placed 0.63” (∅ 16 mm) hole on 29.8” (∅ 758 mm) B.C. / 32.6″ (828.9 mm)
Dimensions *Pump with Gear Motor (not including hazardous encoder)	Height: 22.9″ (581.7 mm) until outlet flange *51.78″ (1315.4 mm); Hazardous Encoder Height: 5.09″ (129.4 mm) Length: 29.05″ (737.8 mm) Width: 34.3″ (872.2 mm)

 

AC Gear Motor

Rated Power / Phase / Voltage / Efficiency	5.5Kw / 3 Phase / 400V / IE3
Type and Classification	ATEX / ICEx II2 G Ex db IIB T4 Gb | II2 D Ex tb IIIC T125o C Db NEC / CEC Class 1, Div 2 Group A-D | Class 2, Div 2 Group E-G
Gear Ratio	12.7:1
Encoder	5V 1024 pp
Motor Amps @ 400V / 50Hz	11.3 A
Weight	Standard: 236 lbs (107 kg) Hazardous Duty: 304 lbs (138 kg)
Dimensions for Standard & Hazardous Duty (Not including hazardous duty encoder)	Height: 31.6″ (802.5 mm) Length: 10.2″ (258 mm) Width: 10.2″ (258 mm)
Dimensions of Hazardous Duty Encoder	5.09″ (129.4 mm)

 

Drive – 3 voltage models available

Rated Power / Phase / Voltage	7.5 Kw / 3 Phase / 380V-500V	7.5 Kw / 3 Phase / 200V-240V	7.5 Kw / 3 Phase / 525V-600V
Frequency	50Hz / 60Hz	50Hz / 60Hz	50Hz / 60Hz
Maximum VFD Speed	84Hz	84Hz	84Hz
VFD Input Amps (Continuous @ 441-500V)	13 A	28 A	10.4 A
VFD Input Amps (Intermittent @ 441-500V)	20.8 A	44.8 A	16.6 A
Type and Classification (For hazardous configurations only. Please note: VFD should not be installed in a hazardous area.)	II (2) G [EX e] [Ex d] [Ex n] II (2) D [Ex tb] [Ex tc]	II (2) G [EX e] [Ex d] [Ex n] II (2) D [Ex tb] [Ex tc]	II (2) G [EX e] [Ex d] [Ex n] II (2) D [Ex tb] [Ex tc]
Weight	31 lbs (14 kg)	51 lbs (23 kg)	31 lbs (14 kg)
Dimensions	Enclosure Size Type: A5 Height: 16.5″ (420 mm); Width: 9.5″ (242 mm); Depth: 9.10″ (231.3 mm)	Enclosure Size Type: B1 Height: 18.9″ (480 mm); Width: 9.5″ (242 mm); Depth: 10.20″ (260 mm)	Enclosure Size Type: A5 Height: 16.5″ (420 mm); Width: 9.5″ (242 mm); Depth: 9.10″ (231.3 mm)

 

Service Kits &Accessories

Fluid Section Service Kit: Balls, Diaphragms, Bellows and O-rings: 637555-XX (More details below)

PRV (Pressure Relief Valve) Service Kit: 67557-X (More details below)

Crankcase Service Kit: EP20-CSVX-01-A (More details below)

Crankcase Seals Service Kit: 637556

Oil and Filter Replacement Kit: 637557

Oil Piston Pump Assembly: 67558

 

AFTERMARKET SERVICE KIT PART NUMBER	DESCRIPTION
637555-AA	Balls – Santoprene Diaphragms – Santoprene
637555-TA	Balls – PTFE Diaphragms – Santoprene
637555-TT	Balls – PTFE Diaphragms – PTFE
637555-ST	Balls – 316 SS Diaphragms – PTFE
EP20-CSVA-01-A	Crankcase – Aluminum Air Cap
EP20-CSVS-01-A	Crankcase – Stainless Steel Air Cap
67557-1	PRV – Aluminum
67557-2	PRV – Cast Iron
67557-3	PRV – Stainless Steel

Accessories

Motor Encoder Cable to Drive 3 meters	67651-003
Motor Encoder Cable to Drive 6 meters	67651-006
Motor Encoder Cable to Drive 9 meters	67651-009 (comes with all completed units as standard)
Motor Encoder Cable to Drive 15 meters	67651-015
Motor Encoder Cable to Drive 50 meters	67651-050
Motor Encoder Cable to Drive 100 meters	67651-100
Leak Detection Sensor (Ordinary Haz)	96270-2
ZENER Barrier Haz (Pack 2 units) – Qty needed: 6 units	97414

 

VFD Accessories

PROFIBUS DP VI MCA 101, COATED	130B1200	Optional Stainless Steel Backplate kit A5	130B3242
DEVICENET MCA 104, COATED	130B1202	Optional Stainless Steel Backplate kit B1	130B3434
CAN OPEN MCA 105, COATED	130B1205	VFD Danfoss Keypad replacement kit	38066254
ETHERNET IP MCA 121, COATED	130B1219
PROFINET MCA 120, COATED	130B1235
MODBUS TCP MCA 122, COATED	130B1296
ETHERCAT MCA 124, COATED	120B5646

 

Gear Motor Spare Parts

Ordinary duty encoder	67580
Hazardous duty encoder	67576
Hazardous duty encoder cable mounting kit	67577

 

Diaphragm Materials

• Long-Life PTFE