Wetted Part Material

• Aluminum alloy：33 KG (ATEX Option)
• SS316：51.5 KG (ATEX Option)
• Cast iron：47 KG (ATEX Option)

 

Diaphragm Material

• Teflon
• EPDM
• Viton
• Santoprene
• NBR
• Neoprene

 

Max. Flow Rate

• Rubber diaphragm：623 LPM
• TP diaphragm：630 LPM
• Teflon PTFE：618 LPM

 

Max. Suction Lift

• Rubber：Dry 6.95 M / Wet 8.6 M
• Thermoplastic compound: Dry 6.7 M / Wet 8.6 M
• TeflonPTFE：Dry 6.7 M / Wet 9 M

 

Parameter

• Liquid inlet：2”
• Liquid outlet：2”
• Air inlet：1/2”
• Max. inlet pressure：8.62 BAR（125 PSI）
• Max. size solids：6.4 mm (1/4″)

 

Model	FDA GT15
Material	316
Max.Flow Rate	Rubber diaphragm：57.7LPM TP diaphragm：57.5LPM Teflon PTFE diaphragm：53.5LPM
Suction Lift	Rubber: Dry: 5.9M Wet: 9.55M Thermoplastic composite: Dry: 5.2M Wet: 9.6M Teflon PTFE：Dry: 4.9M Wet: 9.51M
Paramete	Liquid inlet: 25mm(1″)TRI-CLAMP Liquid discharge: 25mm(1″)TRI-CLAMP Air inlet: 6mm(1/4″) Max. discharge pressure: 8.62BAR（125PSI） Max. size solids: 1.59mm(1/16″) Finishing: Surface Finish: Ra 5.1 μm